To know if the ISDN PRI E1 is UP?

Home » Asterisk Users » To know if the ISDN PRI E1 is UP?
Asterisk Users 1 Comment

your PRI is not up. You can see this “Status: In Alarm, Down, Active” it
means you have some error. Some parameter is not correct with the
configuration and with your line. If you are using Sangoma card then please
check this link http://wiki.sangoma.com/wanpipe-linux-asterisk-debugging

On Tue, May 31, 2011 at 6:02 PM, bilal ghayyad wrote:

> Hi All;
>
> This is the output of the pri show status, so I appreciate if to know if
> that means the E1 is UP? What does it means that the status us (Status: In
> Alarm, Down, Active)? What in the below result give an indication that it is
> UP?
>
> CC*CLI> pri show span 1
> Primary D-channel: 16
> Status: In Alarm, Down, Active
> Switchtype: EuroISDN
> Type: Network
> Overlap Dial: 0
> Logical Channel Mapping: 0
> Timer and counter settings:
> N200: 3
> N202: 3
> K: 7
> T200: 1000
> T202: 10000
> T203: 10000
> T303: 4000
> T305: 30000
> T308: 4000
> T309: 6000
> T313: 4000
> T-HOLD: 4000
> T-RETRIEVE: 4000
> T-RESPONSE: 4000
> Overlap Recv: No
>
> Regards
> Bilal
>
> —
> _____________________________________________________________________
> — Bandwidth and Colocation Provided by http://www.api-digital.com
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>

One thought on - To know if the ISDN PRI E1 is UP?