2 thoughts on - Failed callfile doesn’t jumpto”failed”extension

  • On Fri, 18 Mar 2011 16:48:28 -0700 (PDT), Steve Edwards
    wrote:

    Thanks guys. After testing with a PCI card + Dahdi, and then with a
    Linksys 3102, turns out that neither jumps to the “failed” or “h”
    extension when the remote number is busy, ie. already engaged (with no
    support for callwaiting, ie. two-way calling)

    ========== extensions.conf
    [internal]
    ;call from XLite
    ;exten => _5.,1,Dial(Dahdi/1/${EXTEN})
    exten => _5.,1,Dial(SIP/3102-fxo/${EXTEN})

    exten => h,1,NoOp(Called ended with ${DIALSTATUS})

    exten => failed,1,NoOp(Call ended with ${REASON})
    ========== CLI
    == Using SIP RTP CoS mark 5

  • On Sat, 19 Mar 2011 11:29:36 +0100, Gilles
    wrote:

    After more reading about the Linksys, it turns out that changing
    “Line-In-Use Voltage” in the “PSTN Line tab” from 30 to 54 enabled the
    device to detect that the remote line is already engaged.

    Does someone know how to modify this type of settings in Zaptel/Dahdi?
    Does it require modifying + recompiling its source code?

    Thank you.