Is there any way to see the status ofPRI from the dialplan? I`d like to know whether it was Up or not before I attempt to dial on it.Second best would be to know if was down when I tried dialing (but I need to differenciate between Down and Up-but-provider-was-congeste..
Have you noticed a marked increase in CPU load when using MixMonitor?
I use PHPAgi and Asterisk 184.108.40.206-2.
Is the a CLI command that shows all channels in use at one time?(Whether IAX, SIP, SCCP, etc)?
As well, when I SIP SHOW CHANNELS I see phones registering showing as channels in use.Is there a way to filter this output?
Everyone, We have three different Queues set to leastrecent strategy and from time to time I hear someone complain that they receive short rings (partial ring cycle) and since its not their turn even if they pickup the phone the call is not given..
I have back ported the r feature for app Dial from 1.8.0 to 1.6.2.X. The link to the diff is below. http://files.bluecrow.net/asterisk/backports/1.6.2/asterisk-220.127.116.11-app_ dial-play-indications.diff I made the diff against 18.104.22.168 and later patc..
I am new to asterisk and using it for a research project.Have set up an server (version 22.214.171.124) and 2 SIP phones (Linksys spa901) which are registering fine with the server.They are able to call one another, however, the problem is it takes roug..
Hi I been testing my clients installation for any problems with the farsouth gateway and what I noticed is that the calls are being dropped at transfer. After testing I found that when the reception hits the transfer button on her sip phone, the cal..
Running Asterisk 126.96.36.199 on debian 5.0.6 with mpg123 1.4.3 when i start asterisk, i immediately see two mpg123 processes spawned which sit there forever.I cant imagine its normal behavior, but if it is, please explain 🙂 # /etc/init.d/asterisk s..
, Today I upgraded asterisk 1.6 to 1.8. As the result of this when peers trying to register to asterisk the system shows: NOTICE: chan_sip.c:23417 handle_request_register: Registration from 50 failed for 192.168.1.80:5062 – Wrong password e..
Everyone, I am doing a queue show and I cant see any column that shows a queue member priority. Is there any other command that can show the member priority on the Asterisk 1.4x CLI? We are using this format of dialplan to login agents: exten => 123,Answe..